ASI Audio by Sensaphonics 3DME Gen 2 In-Ear Monitoring Headphone with Active Ambient Mic

Features Active Ambient technology provides controlled 3D ambience with full earphone isolation. Embedded binaural microphones capture full frequency range, full dynamic range natural ambience with accurate 3D directionality. Full-range drivers provide reference-quality sound without crossover distortions. Compact bodypack processing unit combines a monitor mix with the ambient sound. Patented active signal processing enables distortion-free ambience capture up to 135 dB-SPL. Monitor Out jack provides for monitoring of the complete reproduced sound, including by the dB Check (COMING SOON). Intuitive smartphone app sets multiple stored body pack processing options. Selectable ambience level, with left, right adjusted together or separately. Selectable limiting of maximum average reproduced levels, with left, right thresholds adjusted together or separately, and with the limiting action linked between channels or independent. Multiband frequency equalization of the reproduced sound, with left, right adjusted together or separately. NEW Selectable bypassing of all Monitor signal processing, for unimpeded outboard control. NEW Selectable CROS connection for unilateral hearing loss compensation. NEW App-activated Seal Test tones enable confirmation of earphone fit and sealing. Body pack provides ambient level up/down buttons, programmed either for step-wise action or pre-selected levels, for quick in-use adjustment of ambience level. Body pack has a rechargeable Li-Ion battery and Bluetooth interface. Body pack provides LED indication of battery state-of-charge, charging status, and USB power. Specifications Frequency Response 20 Hz – 20 kHz Microphone Input Overload 135 dB-SPL Maximum Output, 500 Hz 122 dB-SPL Microphone Equivalent Input Noise 27 dBA-SPL Monitor Equivalent Input Noise -104 dBV(A) (EQ disengaged), -101 dBV(A) (EQ engaged) Output Noise 20 dBA-SPL (EQ disengaged), 23 dBA-SPL (EQ engaged) Acoustic Insertion gain Off, -24 dB to +12 dB in 16 steps Monitor Sensitivity, 500 Hz 104 dB-SPL for -20 dBV (100 mVrms) input Monitor Input Impedance 10 kOhm Limiter Type Adaptive attack, average responding, frequency selective Limiter Threshold 76 dB-SPL to 104 dB-SPL in 8 steps and Off Maximum Limiter Gain Reduction 20 dB Multiband EQ +/-12 dB at 60, 140, 330, 770, 1800, 4300, 10 kHz Latency 0 (EQ disengaged), 540 µsec (EQ engaged) Operating Time (from full charge) ~8 hours Charge Time (fully depleted battery) ~5 hours Battery State-of-Charge Indication Four LEDs, with flashing low battery warning